Ǽ HOME > ǰҰ > Ǽ

 

Socket Pusher set

  • Ĩ ԰ Ű ϵ Ǫ
  • Ĩ ü ϴ ȿ
  • ۾ հ Ƿε 氨
  • ۾ӵ
  • Ĩ ũ⿡ 3 ÷Ʈ (ɼ)
  • ÷Ʈ ü ϵ

48 Pins Calibration test pod, Type I

 

48 Pins Calibration test pod, Type I

  • testing calibration status of 48-pin universal programmers and multiprogrammers
  • precise voltmeter (multimeter) required
  • content included in the package:
  • The 48 Pins Calibration POD, Type I
  • Faston and toothed lock washer for the programmer's earthing point
  • Ord. no.: 70-0438

48 Pins Calibration test pod, Type I

 

AP1 calibration test pod

  • testing calibration status of 48-pin production programmers and multiprogrammers
  • standard accessories for device programmers:
    • BeeHive204AP
    • BeeHive204AP-AU
  • Ord. no.: 71-2008

AP1 calibration test pod

 

AP3 diagnostic pod

  • diagnostic pod for selftest of the programmer and testing calibration status
  • standard accessories for programmers:
    • BeeProg3
    • BeeHive304
  • Ord. no.: 73-3128

AP1 calibration test pod

 

Diagnostic pod for ISP connectors #2

  • enables self-diagnostic of ISP connectors and ISP cables of Elnec device programmers (similar to selftest+ of ZIF socket)
  • standard accessories for device programmers with 20-pin ISP connector:
    • BeeProg+/BeeProg2/BeeProg2C
    • BeeHive4+/BeeHive204
    • BeeHive8S/BeeHive208S,...
  • Ord. no.: 70-0680

Diagnostic pod for ISP connectors #2

 

Diagnostic pod for ISP connectors

  • enables self-diagnostic of ISP connectors and ISP cables of Elnec device programmers (similar to selftest+ of ZIF socket)
  • optional accessories for programmers with 6-pin and 10-pin ISP connector:
    • BeeProg
    • PIKprog+
    • SmartProg
    • T51prog
  • Ord. no.: 70-0208

Diagnostic pod for ISP connectors

 

48 Pins diagnostic pod - Type I

  • enables execute selftest+ for Elnec device programmers with 48 pins ZIF socket
  • standard accessories for device programmers:
    • BeeProg+/BeeProg2/BeeProg2C
    • BeeHive4+/BeeHive204
    • BeeHive8S/BeeHive208S,...
  • Ord. no.: KKA-0222

48 Pins diagnostic pod - Type I

 

40 Pins Diagnostic pod - Type I

  • enables execute selftest+ for Elnec device programmers with 40 pins ZIF socket
  • standard accessories for device programmers:
    • BeeProg
    • PIKprog+
    • SmartProg
    • T51prog
  • Ord. no.: KKA-0226

40 Pins Diagnostic pod - Type I

 

AP1 PMI selftest pod

  • testing calibration status of 48-pin production programmers and multiprogrammers
  • standard accessories for device programmers:
    • BeeProg2AP
    • BeeHive204AP
    • BeeHive204AP-AU
  • Ord. no.: 71-2006

AP1 PMI selftest pod

 

AP1 ISP connector selftest pod

  • enables self-diagnostic of ISP connectors and ISP cables of Elnec device programmers (similar to selftest+ of ZIF socket)
  • standard accessories for device programmers:
    • BeeProg2AP
    • BeeHive204AP
    • BeeHive204AP-AU
  • Ord. no.: 71-2007

AP1 ISP connector selftest pod

 

BeeProg2C to BeeProg2 upgrade kit

  • allow the BeeProg2C programmer have all features of BeeProg2 programmer
  • Ord. no.: 60-0060

BeeProg2C to BeeProg2 upgrade kit

 

Xprog2 to SmartProg2 upgrade kit

  • allow the specialized programmer MEMprog2, T51prog2 and PIKprog2 have all features of universal programmer SmartProg2
  • Ord. no.: 60-0048

Xprog2 to SmartProg2 upgrade kit

 

Credit box CB-25k

  • accessory for special devices programming by Elnec programmers
  • carry 25.000 credits
  • value of one credit: US $0.01
  • validity: 10 versions of software - can be used after activation (first usage) by current and by next 9 consecutive regular versions of software
  • Ord. no.: 72-0011

Credit box CB-100k

 

Credit box CB-100k

  • accessory for special devices programming by Elnec programmers
  • carry 100.000 credits
  • value of one credit: US $0.006
  • validity: 10 versions of software - can be used after activation (first usage) by current and by next 9 consecutive regular versions of software
  • Ord. no.: 72-0012

Credit box CB-100k

 

Credit box CB-500k

  • accessory for special devices programming by Elnec programmers
  • carry 500.000 credits
  • value of one credit: US $0.003
  • validity: 10 versions of software - can be used after activation (first usage) by current and by next 9 consecutive regular versions of software
  • Ord. no.: 72-0013

Credit box CB-100k

 

Vacuum handling tool kit

  • hand-held vacuum SMD picker with straight and bent tips with suction cups
  • easy and reliable tool for handling devices without damaging leads
  • prevents static shock that could damage devices
  • prevents package contamination
  • made from soft ESD-safe conductive silicone
  • usage: squeeze the vacuum bulb, place the suction cup on the part to be picked up, then release your squeeze
  • parts included in the set:
    • 1x vacuum pen
    • 3x rubber cups (small, medium, large - diameter 3, 6, 9 mm)
    • clear plastic carrying case to prevent damage or contamination of the pen and its components
  • Ord. no.: NRU-0083

Vacuum handling tool kit

 

PLCC Extractor

  • simple tool for extracting of devices in PLCC sockets
  • Ord. no.: NRU-0002

PLCC Extractor

 

PSU upgrade kit #1

  • The internal power supply of programmer might not be sufficient for programming of some bipolar PROM or PLD. In this case arise the communication error. After selecting of such a device, warning window with information of using of external power supply will be displayed. PSU upgrade kit #1 solves this problem.
  • input voltage: 100-240 Vac/50-60 Hz
  • Ord. no.: 50-0033

PSU upgrade kit #1

 

Power supply adapter (BeeProg+/BeeProg2/BeeProg2C)

  • spare part BeeProg+/BeeProg2/BeeProg2C
  • switched adapter 15V/1.6A, PSU, type B
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec programmers:
    • BeeProg+ from S/N :469-04867
    • BeeProg2 from S/N: 1176-00250
    • BeeProg2C: any S/N
    • BeeProg3: any S/N
  • Ord. no.: 50-0049

Power supply adapter (BeeProg+/BeeProg2/BeeProg2C)

 

Power supply adapter (BeeProg+/BeeProg2)

  • spare part for BeeProg+/BeeProg2
  • switched adapter 15V/1A, PSU, type A
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec programmers:
    • BeeProg+ up to S/N :469-04866
    • BeeProg2 up to S/N: 1176-00249
  • Ord. no.: 50-0046

Power supply adapter (BeeProg+/BeeProg2)

 

Power supply adapter (BeeHive204AP/BeeHive204AP-AU)

  • switched adapter 15V/4,3A
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec BeeHive204AP and BeeHive204AP-AU programmers
  • Ord. no.: KIN-0306
  • Power supply adapter (BeeHive204AP/BeeHive204AP-AU)

 

 

Power supply adapter (BeeProg)

  • switched adapter 15V/1A, miniDIN
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec programmers:
    • BeeProg
  • Ord. no.: KIN-0227

Power supply adapter (BeeProg)

 

Power supply adapter (SmartProg2/XXXprog2 , SmartProg + 2708 module)

  • switched adapter 15V/1A, 2.1, center minus
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec programmers:
    • SmartProg2, T51prog2, PIKprog2, MEMprog2
    • SmartProg2/MEMprog2/SmartProg and PREPROM-02aLV + 2708 module
  • Ord. no.: KIN-0315

Power supply adapter (SmartProg2/XXXprog2 , SmartProg + 2708 module)

 

Power supply adapter (BeeHive4+/BeeHive204)

  • spare part for BeeHive4+/204
  • switched adapter 15V/4.3A, PSU, type B
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec programmers:
    • BeeHive4+ S/N: 536-01057 and from S/N: 536-01059
    • BeeHive204 S/N: 1177-00033 and from S/N:1177-00120
  • Ord. no.: 50-0035

Power supply adapter (BeeHive4+/BeeHive204)

 

Power supply adapter (BeeProg2AP)

  • switched adapter 15V/1A
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec BeeProg2AP
  • Ord. no.: KIN-0312

Power supply adapter (BeeProg2AP)

 

Power supply adapter (BeeHive304)

  • switched adapter 15V/6A
  • input voltage: 100-240 Vac/50-60 Hz
  • suitable for Elnec BeeHive304
  • Ord. no.: KIN-0335

Power supply adapter (BeeHive304)

 

Cordset input USA

  • USA input cordset for Elnec programmers
  • Ord. no.: KIN-0215

Cordset input Euro

 

USB cable

  • USB 2.0, Hi-speed cable for connection of Elnec programmer to a PC
  • Ord. no.: KKA-0253

USB cable

 

LPT port cable 25M/25F 1.8m 1:1 IEEE1284

  • meet IEEE1284 requirements
  • optional accessories for BeeProg+ device programmer
  • suitable for all other LPT-connection capable Elnec device programmers
  • Ord. no.: KKA-0224

LPT port cable 25M/25F 1.8m 1:1 IEEE1284

 

ISP cable 20 pin

  • ISP cable for in-circuit programming
  • connectors: Harting 09185207813 or equivalent
  • cable: 1.27mm Ribbon Flat cable AWG28 Belden 9L28020 or equivalent
  • optional accessories for BeeProg2, BeeProg2C,BeeProg2AP, BeeHive204, BeeHvive204AP, BeeHive204AP-AU and BeeHive208S device programmers
  • Ord. no.: KKA-0260

ISP cable 20 pin

 

ISP cable 10 pin

  • ISP cable for in-circuit programming
  • connectors: Harting 09185107813 or equivalent
  • cable: 1.27mm Ribbon Flat cable AWG28 Belden 9L28010 or equivalent
  • optional accessories for MEMprog2 and SmartProg2 device programmers
  • Ord. no.: KKA-0228

ISP cable 10 pin

 

Antistatic set

  • antistatic wrist band set
  • Ord. no.: NRU-0024

Antistatic set

 

ZIF Socket DIL40

  • spare part for:
    • SmartProg
    • SmartProg2
    • MEMprog2
    • T51prog2
    • PIKprog2
  • Ord. no.: KKO-0091

ZIF Socket DIL40

 

ZIF Socket DIL48

  • spare part for:
    • BeeHive208S
    • BeeHive8
    • BeeHive204
    • BeeHive4
    • BeeProg2C
    • BeeProg2
    • BeeProg+
    • BeeProg
    • JetProg
    • LabProg-48LV
    • LabProg+
  • Ord. no.: KKO-0113

ZIF Socket DIL48

 

anti-dust cover for ZIF socket 40/48-pin

  • protects contacts of ZIF socket
  • extends operation life
  • suitable for programmers with 40/48-pin ZIF socket
  • Ord. no.: KCA-0113

anti-dust cover for ZIF socket 40-pin


* ǰ ֽϴ